Original file

Bentley Continental GT 6.0i Bosch ME17.1.6 07C906023E / 1037532311

An original (stock) flash read of the Bosch ME17.1.6 control unit, fitted in Bentley Continental GT 6.0i, hardware number 07C906023E and software number 1037532311, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley Continental GT 6.0idiesel
Control unit
Bosch ME17.1.6
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07C906023E
Software number
1037532311
Vehicle maker's hardware number
07C907309

Technical data

Vehicle
BrandBentley
Car modelBentley Continental GT 6.0i
Enginediesel
Displacement6.0
Control unit
Control unitBosch ME17.1.6
ECU makerBosch
Hardware number07C906023E
Software number1037532311
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8504c21a5aa0afa6
Identification read from the file
ECU nameMED17.1.6
Read typeOBD read (no boot area)
Bosch part / software1037532311Offset in the file: 0x02001A
Vehicle maker's hardware number07C907309Offset in the file: 0x3B290A
Software / calibration07C906023E · version 5179Offset in the file: 0x3B2924
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E8D6
Bosch project identifier (EPK)49/1/MED17/3/D171633//S1716B10C000_NY13H2/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07C906023E and software number 1037532311. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.1.6

HardwareSoftwareVehicles
07C906023CF10SW023532Bentley Continental GT 6.0i
07C906023CF10SW026998Bentley
07C906023CG10SW023586Bentley
07C906023CG10SW026903Bentley
07C906023G1037539200Bentley Continental GT 6.0i
07C906023K1037523884Bentley Continental, Bentley
07C906023K1037539470Bentley Continental GT 6.0i, Bentley Continental GT Speed
07C906023L1037526623Bentley Continental GT 6.0i

Bosch ME17.1.6 original files

The Bosch ME17.1.6 unit page