Original file

Land Rover Range Rover Evoque Bosch MED17.0 BJ32-14C204-MBY / 1037517034

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Land Rover Range Rover Evoque, hardware number BJ32-14C204-MBY and software number 1037517034, 2,112.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque2.0 petrol 240PS
Control unit
Bosch MED17.0
Read type
Full read (boot area included)
File
2,112.00 KB · Flash
Hardware number
BJ32-14C204-MBY
Software number
1037517034
Bosch part / software
10SW011952
Vehicle maker's hardware number
BJ32-12A650-MBY
Software / calibration
BJ32-12B684-MA

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque
Engine2.0 petrol 240PS
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBJ32-14C204-MBY
Software number1037517034
File
File typeOriginal flash read
File size2,112.00 KB (2,162,688 bytes)
File keyde9fac733a1cc121
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software10SW011952Offset in the file: 0x08001A
Vehicle maker's hardware numberBJ32-12A650-MBYOffset in the file: 0x061F2E
Software / calibrationBJ32-12B684-MAOffset in the file: 0x00FC00
Engine descriptionBJ32-14C204-MBYOffset in the file: 0x061F0A
Internal build stringMED170_PBL_67_200_0700Offset in the file: 0x00FA58
Bosch project identifier (EPK)54/1/MED17/2/I420GMO//D170_200_111_0882/110416/145915/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BJ32-14C204-MBY and software number 1037517034. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Land Rover Range Rover EvoqueFlash2,048.00 KB€15Add to cart

All reads of BJ32-14C204-MBY / 1037517034

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
BJ32-14C204-MBV1037549025Land Rover Range Rover Evoque
BJ32-14C204-MBX1037517034Land Rover Range Rover Evoque
BJ32-14C204-MBX10SW000106Land Rover Range Rover Evoque
BJ32-14C204-MBXBJ32-14C204-MBXLand Rover Range Rover Evoque
BJ32-14C204-MBY10SW011952Land Rover Evoque, Land Rover Range Rover Evoque
BJ32-14C204-MBYBJ32-14C204-MBYLand Rover Range Rover Evoque
BJ32-14C204-MCM1037522258Land Rover Evoque
BJ32-14C204-MCT1037517034Land Rover Range Rover Evoque

Bosch MED17.0 original files

The Bosch MED17.0 unit page