Original file

Land Rover Range Rover Evoque Bosch MED17.0 BJ32-14C204-MCU / 10SW000105

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Land Rover Range Rover Evoque, hardware number BJ32-14C204-MCU and software number 10SW000105, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque2.0 petrol 240PS
Control unit
Bosch MED17.0
Read type
Calibration only (data set)
File
256.00 KB · Flash
Hardware number
BJ32-14C204-MCU
Software number
10SW000105
Vehicle maker's hardware number
BJ32-12A650-MCU

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque
Engine2.0 petrol 240PS
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBJ32-14C204-MCU
Software number10SW000105
File
File typeOriginal flash read
File size256.00 KB (262,144 bytes)
File key42d53a023aa5fac4
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software10SW000105Offset in the file: 0x00001A
Vehicle maker's hardware numberBJ32-12A650-MCUOffset in the file: 0x021F2E
Software / calibrationBJ32-14C204-MCUOffset in the file: 0x021F0A
Bosch project identifier (EPK)54/1/MED17/2/I420GMO//D170_200_111_0881/160315/072946/Offset in the file: 0x03FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BJ32-14C204-MCU and software number 10SW000105. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
BJ32-14C204-MBYBJ32-14C204-MBYLand Rover Range Rover Evoque
BJ32-14C204-MCM1037522258Land Rover Evoque
BJ32-14C204-MCT1037517034Land Rover Range Rover Evoque
BJ32-14C204-MCU1037517034Land Rover Range Rover Evoque
BJ32-14C204-MES1037517034Land Rover Range Rover Evoque
BJ32-14C204-MEV1037517034Land Rover Evoque
BV61-12A650-CUA1037523832Ford C-Max 1.6 STCI, Ford C Max T 2012, Ford C-Max
BV61-12A650-CXA1037523899Ford Focus

Bosch MED17.0 original files

The Bosch MED17.0 unit page