Original file

Volvo V40 Bosch MED17.0 EG9N-14C204-IAD / 1037518907

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Volvo V40, hardware number EG9N-14C204-IAD and software number 1037518907, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo V401.6 petrol 180PS
Control unit
Bosch MED17.0
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
EG9N-14C204-IAD
Software number
1037518907
Bosch part / software
1037555247
Software / calibration
31459242 AA

Technical data

Vehicle
BrandVolvo
Car modelV40
Engine1.6 petrol 180PS
Power180.0PS / 132.4kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberEG9N-14C204-IAD
Software number1037518907
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyfaf6eb6cf451ca44
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037555247Offset in the file: 0x08001A
Software / calibration31459242 AAOffset in the file: 0x06A58D
Boot software31312578 ABOffset in the file: 0x00FC18
Internal build stringMED170_PBL_67_T0_DG502_0Offset in the file: 0x00FA58
Bosch project identifier (EPK)58/1/MED17/19/SIG16GGA//D170_421_SPM23_0V70/190314/175756/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number EG9N-14C204-IAD and software number 1037518907. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volvo S40 / V40Flash2,048.00 KB€15Add to cart

All reads of EG9N-14C204-IAD / 1037518907

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
DH52-14C204-MBJLand Rover Freelander
DH52-14C204-MBK1037517034Land Rover Range Rover Evoque 2.0 Si4
DL3A-14C558-AA1037550873Ford Focus 3 RS 2016y
EG9N-14C204-IAB1037518907Volvo V70
EG9N-14C204-IAB1037544388Volvo V40
EG9N-14C204-IAD1037555247Volvo V40
HM51-12A650-MB1037535451Ford FOCUS 3 2.0i
MED170_PBL_67_T0_DG502_01037518907Volvo V40

Bosch MED17.0 original files

The Bosch MED17.0 unit page