Original file
Volvo V40 Bosch MED17.0 EG9N-14C204-IAD / 1037555247
An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Volvo V40, hardware number EG9N-14C204-IAD and software number 1037555247, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Volvo V401.6 · 184.9PS / 136.0kW
- Control unit
- Bosch MED17.0
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- EG9N-14C204-IAD
- Software number
- 1037555247
- Software / calibration
- 31459242 AA
Technical data
| Brand | Volvo |
|---|---|
| Car model | V40 |
| Engine | 1.6 |
| Fuel | Petrol |
| Power | 184.9PS / 136.0kW |
| Control unit | Bosch MED17.0 |
|---|---|
| ECU maker | Bosch |
| Hardware number | EG9N-14C204-IAD |
| Software number | 1037555247 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 1d1922e9f3cb99e0 |
| ECU name | MED17.0 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037555247 | Offset in the file: 0x04001A |
| Software / calibration | 31459242 AA | Offset in the file: 0x06A58D |
| Bosch project identifier (EPK) | 58/1/MED17/19/SIG16GGA//D170_421_SPM23_0V70/190314/175756/ | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number EG9N-14C204-IAD and software number 1037555247. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.0
| Hardware | Software | Vehicles |
|---|---|---|
| DH52-14C204-MBJ | Land Rover Freelander | |
| DH52-14C204-MBK | 1037517034 | Land Rover Range Rover Evoque 2.0 Si4 |
| DL3A-14C558-AA | 1037550873 | Ford Focus 3 RS 2016y |
| EG9N-14C204-IAB | 1037518907 | Volvo V70 |
| EG9N-14C204-IAB | 1037544388 | Volvo V40 |
| EG9N-14C204-IAD | 1037518907 | Volvo V40, Volvo S40 / V40 |
| HM51-12A650-MB | 1037535451 | Ford FOCUS 3 2.0i |
| MED170_PBL_67_T0_DG502_0 | 1037518907 | Volvo V40 |