Original file

Land Rover Range Rover Evoque Bosch MED17.9.7 EJ32-14C204-MER / 10SW011249

An original (stock) flash read of the Bosch MED17.9.7 control unit, fitted in Land Rover Range Rover Evoque, hardware number EJ32-14C204-MER and software number 10SW011249, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque2.0 petrol 240PS
Control unit
Bosch MED17.9.7
Read type
Calibration only (data set)
File
256.00 KB · Flash
Hardware number
EJ32-14C204-MER
Software number
10SW011249
Vehicle maker's hardware number
EJ32-12A650-MER
Software / calibration
EJ32-12B684-MC

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque
Engine2.0 petrol 240PS
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED17.9.7
ECU makerBosch
Hardware numberEJ32-14C204-MER
Software number10SW011249
File
File typeOriginal flash read
File size256.00 KB (262,144 bytes)
File key72a5c09ccdac7806
Identification read from the file
ECU nameMED17.9.7
Read typeCalibration only (data set)
Bosch part / software10SW011249Offset in the file: 0x00001A
Vehicle maker's hardware numberEJ32-12A650-MEROffset in the file: 0x032B22
Software / calibrationEJ32-12B684-MCOffset in the file: 0x032C35
Engine descriptionEJ32-14C204-MEROffset in the file: 0x032A98
Bosch project identifier (EPK)39/1/MED17/190///D1797_262_M013_0337///Offset in the file: 0x03FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number EJ32-14C204-MER and software number 10SW011249. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Land Rover EvoqueFlash2,048.00 KB€15Add to cart

All reads of EJ32-14C204-MER / 10SW011249

Other pairs of Bosch MED17.9.7

HardwareSoftwareVehicles
EJ32-14C204-MBP10SW005974Land Rover Range Rover
EJ32-14C204-MBS1037539251Land Rover Range Rover Evoque 2.0 Si4, Land Rover Range Rover Evoque
EJ32-14C204-MBS10SW011244Land Rover Range Rover Evoque
EJ32-14C204-MEK1037541801Land Rover Range Rover Evoque 2.0 Si4
EJ32-14C204-MKL1037544245Land Rover Range Rover
EJ32-14C204-MKP1037539251Land Rover Evoque
EJ32-14C204-MKP10SW005978Land Rover Range Rover Sport
EJ32-14C204-MKPEJ32-14C204-MKPLand Rover Range Rover Evoque

Bosch MED17.9.7 original files

The Bosch MED17.9.7 unit page