Original file

Land Rover Range Rover Evoque Bosch MED17.9.7 GJ32-14C204-MKF / GJ32-14C204-MKF

An original (stock) flash read of the Bosch MED17.9.7 control unit, fitted in Land Rover Range Rover Evoque, hardware number GJ32-14C204-MKF and software number GJ32-14C204-MKF, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque2.0 240PS
Control unit
Bosch MED17.9.7
Read type
Calibration only (data set)
File
256.00 KB · Flash
Hardware number
GJ32-14C204-MKF
Software number
GJ32-14C204-MKF
Bosch part / software
10SW039356
Vehicle maker's hardware number
GJ32-12A650-MKF
Software / calibration
EJ32-12B684-MC

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque
Engine2.0 240PS
FuelPetrol
Control unit
Control unitBosch MED17.9.7
ECU makerBosch
Hardware numberGJ32-14C204-MKF
Software numberGJ32-14C204-MKF
File
File typeOriginal flash read
File size256.00 KB (262,144 bytes)
File keybc5b79c461e57a3e
Identification read from the file
ECU nameMED17.9.7
Read typeCalibration only (data set)
Bosch part / software10SW039356Offset in the file: 0x00001A
Vehicle maker's hardware numberGJ32-12A650-MKFOffset in the file: 0x032BAA
Software / calibrationEJ32-12B684-MCOffset in the file: 0x032CBD
Engine descriptionGJ32-14C204-MKFOffset in the file: 0x032B20
Bosch project identifier (EPK)39/1/MED17/190///D1797_262_M013_0343///Offset in the file: 0x03FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GJ32-14C204-MKF and software number GJ32-14C204-MKF. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Land Rover Range Rover EvoqueFlash2,048.00 KB€15Add to cart

All reads of GJ32-14C204-MKF / GJ32-14C204-MKF

Other pairs of Bosch MED17.9.7

HardwareSoftwareVehicles
GJ32-14C204-MKC1037539251Land Rover Range Rover
GJ32-14C204-MKCGJ32-14C204-MKCLand Rover Range Rover Evoque
GJ32-14C204-MKE10SW008513Land Rover Range Rover Evoque
GJ32-14C204-MKF10SW039356Land Rover Range Rover Evoque
GJ32-14C204-MNE1037539251Land Rover Range Rover
GJ32-14C204-MXB10SW008506Land Rover Range Rover
GK72-14C204-MBCGK72-14C204-MBCLand Rover Freelander
GK72-14C204-MBE10SW008518Land Rover Discovery

Bosch MED17.9.7 original files

The Bosch MED17.9.7 unit page