Original file

Land Rover Discovery Bosch MED17.9.7 GK72-14C204-MBE / 10SW008518

An original (stock) flash read of the Bosch MED17.9.7 control unit, fitted in Land Rover Discovery, hardware number GK72-14C204-MBE and software number 10SW008518, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Discovery2.0 240PS
Control unit
Bosch MED17.9.7
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GK72-14C204-MBE
Software number
10SW008518
Vehicle maker's hardware number
GK72-12A650-MBE
Software / calibration
EJ32-12B684-MC

Technical data

Vehicle
BrandLand Rover
Car modelDiscovery
Engine2.0 240PS
FuelPetrol
Power240PS / 176.5kW
Control unit
Control unitBosch MED17.9.7
ECU makerBosch
Hardware numberGK72-14C204-MBE
Software number10SW008518
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya92db103ca8a1181
Identification read from the file
ECU nameMED17.9.7
Read typeCalibration only (data set)
Bosch part / software10SW008518Offset in the file: 0x04001A
Vehicle maker's hardware numberGK72-12A650-MBEOffset in the file: 0x072BAA
Software / calibrationEJ32-12B684-MCOffset in the file: 0x072CBD
Engine descriptionGK72-14C204-MBEOffset in the file: 0x072B20
Bosch project identifier (EPK)39/1/MED17/190///D1797_262_M013_0343///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GK72-14C204-MBE and software number 10SW008518. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Land Rover DiscoveryFlash1,920.00 KB€15Add to cart

All reads of GK72-14C204-MBE / 10SW008518

Other pairs of Bosch MED17.9.7

HardwareSoftwareVehicles
GJ32-14C204-MKFGJ32-14C204-MKFLand Rover Range Rover Evoque
GJ32-14C204-MNE1037539251Land Rover Range Rover
GJ32-14C204-MXB10SW008506Land Rover Range Rover
GK72-14C204-MBCGK72-14C204-MBCLand Rover Freelander
GK72-14C204-MCC1037539251Land Rover Range Rover Evoque
GK72-14C204-MCC10SW001718Land Rover Discovery Sport
GW93-14C204-MHC10SW001727Jaguar XJ
GW93-14C204-MHCGW93-14C204-MHCJaguar XJ

Bosch MED17.9.7 original files

The Bosch MED17.9.7 unit page