Original file
Jaguar XJ Bosch MED17.9.7 GW93-14C204-MHC / GW93-14C204-MHC
An original (stock) flash read of the Bosch MED17.9.7 control unit, fitted in Jaguar XJ, hardware number GW93-14C204-MHC and software number GW93-14C204-MHC, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Jaguar XJ2.0 diesel · 240.0PS / 176.5kW
- Control unit
- Bosch MED17.9.7
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- GW93-14C204-MHC
- Software number
- GW93-14C204-MHC
- Bosch part / software
- 10SW001727
- Vehicle maker's hardware number
- GW93-12A650-MHC
- Software / calibration
- EJ32-12B684-MC
Technical data
| Brand | Jaguar |
|---|---|
| Car model | XJ |
| Engine | 2.0 diesel |
| Power | 240.0PS / 176.5kW |
| Control unit | Bosch MED17.9.7 |
|---|---|
| ECU maker | Bosch |
| Hardware number | GW93-14C204-MHC |
| Software number | GW93-14C204-MHC |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | c69fdb0db65991f3 |
| ECU name | MED17.9.7 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW001727 | Offset in the file: 0x04001A |
| Vehicle maker's hardware number | GW93-12A650-MHC | Offset in the file: 0x072B22 |
| Software / calibration | EJ32-12B684-MC | Offset in the file: 0x072C35 |
| Engine description | GW93-14C204-MHC | Offset in the file: 0x072A98 |
| Bosch project identifier (EPK) | 39/1/MED17/190///D1797_262_M013_0333/// | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.9.7 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number GW93-14C204-MHC and software number GW93-14C204-MHC. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.9.7
| Hardware | Software | Vehicles |
|---|---|---|
| GK72-14C204-MBE | 10SW008518 | Land Rover Discovery |
| GK72-14C204-MCC | 1037539251 | Land Rover Range Rover Evoque |
| GK72-14C204-MCC | 10SW001718 | Land Rover Discovery Sport |
| GW93-14C204-MHC | 10SW001727 | Jaguar XJ |
| GX63-14C204-MHD | GX63-12A650-MHD | Jaguar XF |
| GX63-14C204-MHE | 10SW008652 | Jaguar XF |
| GX63-14C204-MHE | GX63-14C204-MHE | Jaguar XF |
| GX63-14C204-MHF | 10SW014189 | Jaguar XF |