Original file

Jaguar F-Type Bosch MED17.9.9 J8A2-14C570-BUH / 10SW046338

An original (stock) flash read of the Bosch MED17.9.9 control unit, fitted in Jaguar F-Type, hardware number J8A2-14C570-BUH and software number 10SW046338, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar F-Type2.0 petrol 250PS
Control unit
Bosch MED17.9.9
Read type
Calibration only (data set)
File
896.00 KB · Flash
Hardware number
J8A2-14C570-BUH
Software number
10SW046338

Technical data

Vehicle
BrandJaguar
Car modelF-Type
Engine2.0 petrol 250PS
Power250.0PS / 183.9kW
Control unit
Control unitBosch MED17.9.9
ECU makerBosch
Hardware numberJ8A2-14C570-BUH
Software number10SW046338
File
File typeOriginal flash read
File size896.00 KB (917,504 bytes)
File key9f7bbb7ef6237771
Identification read from the file
ECU nameMED17.9.9
Read typeCalibration only (data set)
Bosch part / software10SW046338Offset in the file: 0x00001A
Bosch project identifier (EPK)47/1/MED17/190///D1799_P4SSFR_1715BR2_D142_0///Offset in the file: 0x0DFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number J8A2-14C570-BUH and software number 10SW046338. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.9

Bosch MED17.9.9 original files

The Bosch MED17.9.9 unit page