Original file

Rover Bosch MED17.9.9 K8A2-14C570-BRC / 10SW038621

An original (stock) flash read of the Bosch MED17.9.9 control unit, fitted in Rover, hardware number K8A2-14C570-BRC and software number 10SW038621, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Roverdiesel
Control unit
Bosch MED17.9.9
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
K8A2-14C570-BRC
Software number
10SW038621
Software / calibration
D1799_P4SSFR_1805BR1_IS2_0

Technical data

Vehicle
BrandRover
Enginediesel
Control unit
Control unitBosch MED17.9.9
ECU makerBosch
Hardware numberK8A2-14C570-BRC
Software number10SW038621
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyab6bbac2e1923d9d
Identification read from the file
ECU nameMED17.9.9
Read typeCalibration only (data set)
Bosch part / software10SW038621Offset in the file: 0x02001A
Software / calibrationD1799_P4SSFR_1805BR1_IS2_0Offset in the file: 0x0FFF08
Bosch project identifier (EPK)46/1/MED17/190///D1799_P4SSFR_1805BR1_IS2_0///Offset in the file: 0x0FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number K8A2-14C570-BRC and software number 10SW038621. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.9

Bosch MED17.9.9 original files

The Bosch MED17.9.9 unit page