Original file

Fiat Dolbo Bosch ME17.3.0 0261S21006 / 10SW040298

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat Dolbo, hardware number 0261S21006 and software number 10SW040298, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Dolbo
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S21006
Software number
10SW040298
Vehicle maker's hardware number
46341567
Software / calibration
1730E2104A1

Technical data

Vehicle
BrandFiat
Car modelDolbo
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S21006
Software number10SW040298
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key6e3c34eaf960a7e7
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
Bosch part / software0261S21006 / 10SW040298Offset in the file: 0x063EF2 / 0x02001A
Vehicle maker's hardware number46341567Offset in the file: 0x063F0D
Software / calibration1730E2104A1Offset in the file: 0x07FF08
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730E2104A1///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S21006 and software number 10SW040298. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S1757410SW010679Fiat 500, Fiat 595 Competizione, Fiat 500 / 595 / 695
0261S21004039955Fiat
0261S2100510SW042645Alfa Romeo Giulietta
0261S2100510SW044632Alfa Romeo Giulietta
0261S2100810SW038752Fiat 500 Abarth, Fiat 595 Abarth, Fiat 500 / 595 / 695
0261S2100810SW040515Fiat 500 / 595 / 695, Fiat 500, Fiat 595 Abarth
0261S2100810SW044422Fiat 500, Fiat 595 Abarth, Fiat Pista
0261S2100810SW044424Fiat 500, Fiat Abarth Pista, Abarth

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page