Original file

Jaguar XKR Bosch MED17.8.31 DX23-14C204-RTG / 004218

An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Jaguar XKR, hardware number DX23-14C204-RTG and software number 004218, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XKR5.0 510PS
Control unit
Bosch MED17.8.31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
DX23-14C204-RTG
Software number
004218
Bosch part / software
10SW004218

Technical data

Vehicle
BrandJaguar
Car modelXKR
Engine5.0 510PS
FuelPetrol
Control unit
Control unitBosch MED17.8.31
ECU makerBosch
Hardware numberDX23-14C204-RTG
Software number004218
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key72545acc4fe40799
Identification read from the file
ECU nameMED17.8.31
Read typeCalibration only (data set)
Bosch part / software10SW004218Offset in the file: 0x18001A
Software / calibrationDX23-14C204-RTGOffset in the file: 0x1C3FA4
Bosch project identifier (EPK)57/1/MED17/54/MED17.8.31//D1783C1_054V8P4SC_M9460/Dst00//Offset in the file: 0x1FDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DX23-14C204-RTG and software number 004218. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.31

Bosch MED17.8.31 original files

The Bosch MED17.8.31 unit page