Original file

Land Rover Range Rover Bosch MED17.8.31 GK62-14C204-EAB / 10SW001339

An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Land Rover Range Rover, hardware number GK62-14C204-EAB and software number 10SW001339, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover5.0 petrol 550PS
Control unit
Bosch MED17.8.31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GK62-14C204-EAB
Software number
10SW001339

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover
Engine5.0 petrol 550PS
Power550.0PS / 404.5kW
Control unit
Control unitBosch MED17.8.31
ECU makerBosch
Hardware numberGK62-14C204-EAB
Software number10SW001339
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0300a82aed12a26a
Identification read from the file
ECU nameMED17.8.31
Read typeCalibration only (data set)
Bosch part / software10SW001339Offset in the file: 0x18001A
Software / calibrationGK62-14C204-EABOffset in the file: 0x1C8A30
Bosch project identifier (EPK)58/1/MED17/54/MED17.8.31//D1783C1_054V8P7SC_M13500/Dst00//Offset in the file: 0x1FDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GK62-14C204-EAB and software number 10SW001339. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.31

HardwareSoftwareVehicles
FPLA-14C204-TTE1037538234Land Rover Range Rover, Land Rover Sport
FX23-14C204-TCD1037538234Jaguar XF
FX53-14C204-TTE1037538234Jaguar F-Type, Jaguar F-Type / S / Project 7
FX53-14C204-TTF1037538234Jaguar XF, Jaguar S-Type
GK62-14C204-EAC004889Land Rover Range Rover Sport SVR
GK62-14C204-EAD1037538234Land Rover Range Rover
GK62-14C204-ETC1037538234Land Rover
GK62-14C204-ETCGK62-14C204-ETCLand Rover Range Rover Sport

Bosch MED17.8.31 original files

The Bosch MED17.8.31 unit page