Original file

Jaguar F-Pace Bosch MED17.8.32 JK83-14C570-UTD / JK83-14C570-UTD

An original (stock) flash read of the Bosch MED17.8.32 control unit, fitted in Jaguar F-Pace, hardware number JK83-14C570-UTD and software number JK83-14C570-UTD, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar F-Pace3.0 · 380.0PS / 279.5kW
Control unit
Bosch MED17.8.32
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
JK83-14C570-UTD
Software number
JK83-14C570-UTD
Bosch part / software
10SW018741

Technical data

Vehicle
BrandJaguar
Car modelF-Pace
Engine3.0
FuelPetrol
Power380.0PS / 279.5kW
Control unit
Control unitBosch MED17.8.32
ECU makerBosch
Hardware numberJK83-14C570-UTD
Software numberJK83-14C570-UTD
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key949966d205ff17b0
Identification read from the file
ECU nameMED17.8.32
Read typeOBD read (no boot area)
Bosch part / software10SW018741Offset in the file: 0x18001A
Bosch project identifier (EPK)40/1/MED17/54///D17832_126_SCF_GF0481///Offset in the file: 0x17FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.32 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JK83-14C570-UTD and software number JK83-14C570-UTD. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.32

HardwareSoftwareVehicles
HPLA-14C570-UTG10SW028303Land Rover Range Rover
JK83-14C570-UBA10SW020426Land Rover Velar
JK83-14C570-UTD018741Land Rover Velar
JK83-14C570-UTD10SW018741Jaguar F-Pace
JPLA-14C570-UTC030110Land Rover Range Rover
JX73-14C570-TBA020429Jaguar XE
JX73-14C570-TTC10SW018761Jaguar XE
JY32-14C570-UTC10SW030115Land Rover Discovery

Bosch MED17.8.32 original files

The Bosch MED17.8.32 unit page