Original file

Audi A1 Bosch MED17.5.5 03C906016BG / 1037525250

An original (stock) flash read of the Bosch MED17.5.5 control unit, fitted in Audi A1, hardware number 03C906016BG and software number 1037525250, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A11.4 petrol 122PS
Control unit
Bosch MED17.5.5
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03C906016BG
Software number
1037525250
Software / calibration
03C906016BH

Technical data

Vehicle
BrandAudi
Car modelA1
Engine1.4 petrol 122PS
Power122.4PS / 90.0kW
Control unit
Control unitBosch MED17.5.5
ECU makerBosch
Hardware number03C906016BG
Software number1037525250
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7b8e1002b7151b47
Identification read from the file
ECU nameMED17.5.5
Read typeOBD read (no boot area)
Bosch part / software1037525250Offset in the file: 0x08001A
Vehicle maker's hardware number03C906016BGOffset in the file: 0x05E190
Software / calibration03C906016BH · version 9894Offset in the file: 0x05E1AA
Internal build stringMED17 CB.03.05.04Offset in the file: 0x00DA5E
Bosch project identifier (EPK)47/1/MED17/3/D17553xN//D17553DN_M14LPA1/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03C906016BG and software number 1037525250. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A1Flash1,504.00 KB€15Add to cart
Audi A1 1.4 TSI/TFSIFlash2,048.00 KB€15Add to cart

All reads of 03C906016BG / 1037525250

Other pairs of Bosch MED17.5.5

HardwareSoftwareVehicles
03C906016BG1037524508Audi
03C906016BG1037524815Audi A1, Audi A1 1.4 TFSI, Audi A1 1.4 TSI - 122hp
03C906016BG1037524818Audi A1, Audi A1 1.4 TSI, Audi A1 1.4 TSI/TFSI
03C906016BG1037525249Audi A1, Audi A1 1.4 TFSI, Audi pcmflash
03C906016BG1037525326Audi
03C906016BG1037525793Audi A1, Audi A1 1.4 TSI
03C906016BG1037528705Audi A1
03C906016BG1037529915Audi A1

Bosch MED17.5.5 original files

The Bosch MED17.5.5 unit page