Original file

Mercedes-Benz E500 Bosch MED17.7 0000538060 / 1037521144

An original (stock) flash read of the Bosch MED17.7 control unit, fitted in Mercedes-Benz E500, hardware number 0000538060 and software number 1037521144, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E5004.6 petrol 408PS
Control unit
Bosch MED17.7
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0000538060
Software number
1037521144
Bosch part / software
1037538060
Software / calibration
2789022500

Technical data

Vehicle
BrandMercedes-Benz
Car modelE500
Engine4.6 petrol 408PS
Power408.0PS / 300.1kW
Control unit
Control unitBosch MED17.7
ECU makerBosch
Hardware number0000538060
Software number1037521144
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5dbf6d2090f11b72
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037538060Offset in the file: 0x02001A
Software / calibration2789022500Offset in the file: 0x02020F
Data set number2789036200Offset in the file: 0x3F537E
Boot software0009040300Offset in the file: 0x00FC51
Internal build stringME177_9700D010_5.60;0 MOffset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0000538060 and software number 1037521144. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7

HardwareSoftwareVehicles
00000002271037521144Mercedes-Benz G, Mercedes-Benz E500, Mercedes-Benz C350
00005289641037521144Mercedes-Benz GL63
00005301881037530188Mercedes-Benz GL
00005301921037530074Mercedes-Benz GL
00005470851037526717Mercedes-Benz
002011000010SW022679Mercedes-Benz E
00944884400054478840Mercedes-Benz KW
01111222201037551935Mercedes-Benz S500

Bosch MED17.7 original files