Original file

Jaguar 35T XE 2017y Bosch MED17.8.31 HX73-14C204-JAD / 10SW012869

An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Jaguar 35T XE 2017y, hardware number HX73-14C204-JAD and software number 10SW012869, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar 35T XE 2017y
Control unit
Bosch MED17.8.31
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
HX73-14C204-JAD
Software number
10SW012869
Software / calibration
CPLA-12B684-YF

Technical data

Vehicle
BrandJaguar
Car model35T XE 2017y
Control unit
Control unitBosch MED17.8.31
ECU makerBosch
Hardware numberHX73-14C204-JAD
Software number10SW012869
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameJaguar 35T XE 2017y
File key9a5594c40b8ef661
Identification read from the file
ECU nameMED17.8.3
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW012869Offset in the file: 0x04001A
Software / calibrationCPLA-12B684-YFOffset in the file: 0x00FD00
Engine descriptionHX73-14C204-JADOffset in the file: 0x1C6D14
Internal build stringMED1783_PBL_054_10.600Offset in the file: 0x00FA58
Bosch project identifier (EPK)39/1/MED17/54///D1783_126V6_SCM_0852///Offset in the file: 0x17FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HX73-14C204-JAD and software number 10SW012869. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.31

Bosch MED17.8.31 original files

The Bosch MED17.8.31 unit page