Original file

Fiat 500 Bosch ME17.3.0 46351486 / 10SW070464

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 500, hardware number 46351486 and software number 10SW070464, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 5001.4 petrol 180PS
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
46351486
Software number
10SW070464
Software / calibration
1730E2109B1

Technical data

Vehicle
BrandFiat
Car model500
Engine1.4 petrol 180PS
Power180.0PS / 132.4kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number46351486
Software number10SW070464
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key76dcc7595158bb8f
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software10SW070464Offset in the file: 0x08001A
Vehicle maker's hardware number46351486Offset in the file: 0x063EE5
Software / calibration1730E2109B1Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730E2109B1///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 46351486 and software number 10SW070464. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S21189041262Fiat 500
0261S2118910SW041262Fiat 500
0261S2118910SW044435Fiat 500
463514830261S102SLFiat Abarth 595 Turismo
46351483071916Abarth 500
4635148310SW071916Fiat 500
463516500261S102SNFiat Abarth 595 Competizione
4635165010SW072069Fiat 500, Fiat 595 Competizione

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page