Original file

Mercedes-Benz E Bosch MED17.7 6D39060D93B / 1037508406

An original (stock) flash read of the Bosch MED17.7 control unit, fitted in Mercedes-Benz E, hardware number 6D39060D93B and software number 1037508406, 4,224.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E3.5 petrol 306PS
Control unit
Bosch MED17.7
Read type
Full read (boot area included)
File
4,224.00 KB · Flash
Hardware number
6D39060D93B
Software number
1037508406
Bosch part / software
1037518293
Software / calibration
2769020900

Technical data

Vehicle
BrandMercedes-Benz
Car modelE
Engine3.5 petrol 306PS
Power306.0PS / 225.1kW
Control unit
Control unitBosch MED17.7
ECU makerBosch
Hardware number6D39060D93B
Software number1037508406
File
File typeOriginal flash read
File size4,224.00 KB (4,325,376 bytes)
File key7efc92a9717b6054
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037518293Offset in the file: 0x02001A
Software / calibration2769020900Offset in the file: 0x02020F
Data set number2769031600Offset in the file: 0x3F52FE
Boot software0009040100Offset in the file: 0x00FC51
Internal build stringME177_9700D010_5.41;0 MOffset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6D39060D93B and software number 1037508406. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz R350Flash4,096.00 KB€15Add to cart
Mercedes-Benz CFlash4,096.00 KB€15Add to cart
Mercedes-Benz CFlash4,096.00 KB€15Add to cart
Mercedes-Benz CLS350Flash4,096.00 KB€15Add to cart
Mercedes-Benz CLSFlash4,096.00 KB€15Add to cart
Mercedes-Benz C-ClassFlash4,096.00 KB€15Add to cart
Mercedes-Benz C350Flash4,096.00 KB€15Add to cart

All reads of 6D39060D93B / 1037508406

Other pairs of Bosch MED17.7

HardwareSoftwareVehicles
4A40070BS0H00001037526717Mercedes-Benz A45, Mercedes-Benz CLA
4A42110CS0H00001037526717Mercedes-Benz A45
6B46540N83RT00010SW014025Mercedes-Benz SLC
6D39060C93B1037508406Mercedes-Benz E300, Mercedes-Benz E-Class
8D39060O83B1037508406Mercedes-Benz CLS55, Mercedes-Benz CLS500, Mercedes-Benz CLS
8D41070P83B00001037525877Mercedes-Benz GL500
8D42100O83B00001037521144Mercedes-Benz E, Mercedes-Benz CLS550
8D42100U83B00021037521144Mercedes-Benz E63

Bosch MED17.7 original files