Original file

Volvo XC60 Bosch MED17 DG9N-14C204-BAC / 1037543603

An original (stock) flash read of the Bosch MED17 control unit, fitted in Volvo XC60, hardware number DG9N-14C204-BAC and software number 1037543603, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo XC602.0 · 240.0PS / 176.5kW
Control unit
Bosch MED17
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
DG9N-14C204-BAC
Software number
1037543603
Software / calibration
31431593 AA

Technical data

Vehicle
BrandVolvo
Car modelXC60
Engine2.0
FuelPetrol
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED17
ECU makerBosch
Hardware numberDG9N-14C204-BAC
Software number1037543603
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye90ff1234895e21a
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software1037543603Offset in the file: 0x04001A
Software / calibration31431593 AAOffset in the file: 0x0638E3
Bosch project identifier (EPK)55/1/MED17/2/I420GMO//D170_320_9CU3_0N51/111212/181206/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DG9N-14C204-BAC and software number 1037543603. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17

Bosch MED17 original files