Original file

Great Wall H6 Bosch MED17 F01R00DBW1

An original (stock) flash read of the Bosch MED17 control unit, fitted in Great Wall H6, hardware number F01R00DBW1, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Great Wall H61.5 petrol 150PS
Control unit
Bosch MED17
Read type
Calibration only (data set)
File
1,536.00 KB · Flash
Hardware number
F01R00DBW1
Bosch part / software
F01R0ADB6K
Software / calibration
UJ17100I00

Technical data

Vehicle
BrandGreat Wall
Car modelH6
Engine1.5 petrol 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch MED17
ECU makerBosch
Hardware numberF01R00DBW1
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File keyddc801460d194952
Identification read from the file
Read typeCalibration only (data set)
Bosch part / softwareF01R0ADB6KOffset in the file: 0x02001A
Software / calibrationUJ17100I00Offset in the file: 0x020233
Bosch project identifier (EPK)532/1/MED17////UJ17100I00/Dst00//Offset in the file: 0x020233

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F01R00DBW1. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17

Bosch MED17 original files