Original file

Seat Ateca Bosch MED17.1.27 04C907309BB / 10SW035121

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Seat Ateca, hardware number 04C907309BB and software number 10SW035121, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Ateca1.0 petrol 115PS
Control unit
Bosch MED17.1.27
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
04C907309BB
Software number
10SW035121
Software / calibration
04C906025S

Technical data

Vehicle
BrandSeat
Car modelAteca
Engine1.0 petrol 115PS
Power115.6PS / 85.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BB
Software number10SW035121
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd768372d0c198be3
Identification read from the file
ECU nameMED17.1.27
Read typeCalibration only (data set)
Bosch part / software10SW035121Offset in the file: 0x18001A
Vehicle maker's hardware number04C907309BBOffset in the file: 0x1C6B02
Software / calibration04C906025S · version 6202Offset in the file: 0x1C6B1C
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33Q51///Offset in the file: 0x1FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BB and software number 10SW035121. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BB10SW025031Seat Arona
04C907309BB10SW035059Volkswagen Polo, Volkswagen Ibiza, Seat
04C907309BB10SW035060Škoda Octavia 3 1.0 TSI
04C907309BB10SW035120Škoda Rapid
04C907309BB10SW035123Volkswagen T-Cross, Volkswagen Arona, Seat
04C907309BB10SW035690Audi A3
04C907309BB10SW036068Volkswagen Golf
04C907309BB10SW036073Volkswagen Polo, Volkswagen Ibiza, Seat

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page