Original file

Volkswagen Polo 1.0 TSI Bosch MED17.5.21 04C907309BB / 036073

An original (stock) flash read of the Bosch MED17.5.21 control unit, fitted in Volkswagen Polo 1.0 TSI, hardware number 04C907309BB and software number 036073, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo 1.0 TSI1.0 petrol 95.2PS / 70.0kW
Control unit
Bosch MED17.5.21
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
04C907309BB
Software number
036073
Bosch part / software
10SW036073
Software / calibration
04C906025B

Technical data

Vehicle
BrandVolkswagen
Car modelPolo 1.0 TSI
Engine1.0 petrol 95.2PS / 70.0kW
Control unit
Control unitBosch MED17.5.21
ECU makerBosch
Hardware number04C907309BB
Software number036073
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye5f18fcde3e13d29
Identification read from the file
ECU nameMED17.1.27
Read typeCalibration only (data set)
Bosch part / software10SW036073Offset in the file: 0x38001A
Vehicle maker's hardware number04C907309BBOffset in the file: 0x3C6B02
Software / calibration04C906025B · version 6249Offset in the file: 0x3C6B1C
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33Q51///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.21 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BB and software number 036073. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen Polo 1.0 TSIFlash4,096.00 KB€15Add to cart

All reads of 04C907309BB / 036073

Other pairs of Bosch MED17.5.21

HardwareSoftwareVehicles
04C907309AT10SW023811Volkswagen, Seat
04C907309AT10SW023951Seat Arona, Seat Arosa
04C907309AT10SW023953Volkswagen Polo, Audi, Seat
04C907309BB025031Seat Arona 1.0 TSI
04E9060161037532219Volkswagen pcmflash
04E9060161037533204Volkswagen pcmflash
04E9060161037537934Volkswagen pcmflash
04E9060161037543627Volkswagen pcmflash

Bosch MED17.5.21 original files

The Bosch MED17.5.21 unit page