Original file

Volkswagen pcmflash Bosch MED17.5.25 04E906027DG / 04E906027DG

An original (stock) flash read of the Bosch MED17.5.25 control unit, fitted in Volkswagen pcmflash, hardware number 04E906027DG and software number 04E906027DG, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflash1.2 petrol · 104.7PS / 77.0kW
Control unit
Bosch MED17.5.25
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
04E906027DG
Software number
04E906027DG
Bosch part / software
10SW009642
Vehicle maker's hardware number
04E907309AG

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Engine1.2 petrol
Power104.7PS / 77.0kW
Control unit
Control unitBosch MED17.5.25
ECU makerBosch
Hardware number04E906027DG
Software number04E906027DG
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key72542db670f5107e
Identification read from the file
ECU nameMED17.5.25
Read typeFull read (boot area included)
Bosch part / software10SW009642Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309AGOffset in the file: 0x26FA86
Software / calibration04E906027DG · version 9233Offset in the file: 0x26FAA0
Bosch project identifier (EPK)38/1/MED17/3///D17525V24C001_M27B75///Offset in the file: 0x23FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.25 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E906027DG and software number 04E906027DG. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.25

HardwareSoftwareVehicles
04E906027DC10SW009510Volkswagen pcmflash
04E906027DF1037549191Volkswagen pcmflash
04E906027DF1037555686Volkswagen pcmflash
04E906027DF10SW010781Volkswagen pcmflash
04E906027DG1037550022Volkswagen pcmflash
04E906027DG1037553883Volkswagen pcmflash
04E906027DG10SW003759Volkswagen pcmflash
04E906027DG10SW009642Volkswagen pcmflash

Bosch MED17.5.25 original files

The Bosch MED17.5.25 unit page