Original file

Audi Q3 Bosch MED17.5.25 04E907309AD / 04E906027EK

An original (stock) flash read of the Bosch MED17.5.25 control unit, fitted in Audi Q3, hardware number 04E907309AD and software number 04E906027EK, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q31.4 petrol · 149.6PS / 110.0kW
Control unit
Bosch MED17.5.25
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04E907309AD
Software number
04E906027EK
Bosch part / software
10SW007408

Technical data

Vehicle
BrandAudi
Car modelQ3
Engine1.4 petrol
Power149.6PS / 110.0kW
Control unit
Control unitBosch MED17.5.25
ECU makerBosch
Hardware number04E907309AD
Software number04E906027EK
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyef016dd3ddb36fb4
Identification read from the file
ECU nameMED17.5.25
Read typeFull read (boot area included)
Bosch part / software10SW007408Offset in the file: 0x24001A
Vehicle maker's hardware number04E907309ADOffset in the file: 0x2799AE
Software / calibration04E906027EK · version 2897Offset in the file: 0x2799C8
Bosch project identifier (EPK)38/1/MED17/3///D17525V22C001_M27B92///Offset in the file: 0x27FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.5.25 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309AD and software number 04E906027EK. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.5.25

HardwareSoftwareVehicles
04E907309AC10SW009510Volkswagen
04E907309AC10SW010177Volkswagen Golf, Volkswagen A3, Audi
04E907309AC10SW020748Audi
04E907309AD001088Audi A3 1.4 TSI/TFSI, Audi Q3 1.4 TFSI
04E907309AD1037540270Audi Q3
04E907309AD1037548255Audi Q3
04E907309AD10SW007408Audi
04E907309AD10SW011181Audi

Bosch MED17.5.25 original files

The Bosch MED17.5.25 unit page