Original file

Audi A4 4.2 FSI Bosch MED9.1.x 0261S02205 / 1037387530

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi A4 4.2 FSI, hardware number 0261S02205 and software number 1037387530, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 4.2 FSI4.2 petrol 420.0PS / 308.9kW
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02205
Software number
1037387530
Bosch part / software
0261S02555
Software / calibration
8E1910560E

Technical data

Vehicle
BrandAudi
Car modelA4 4.2 FSI
Engine4.2 petrol 420.0PS / 308.9kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02205
Software number1037387530
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydfec4cb8af8bdd2e
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02555 / 1037387530Offset in the file: 0x1D43B6 / 0x1D43C1
Software / calibration8E1910560E · version 0010Offset in the file: 0x1D438F
Engine description4.2L V8/4V FSIOffset in the file: 0x1D439C
Bosch project identifier (EPK)59/1/MED91/5/8542.08//54AB7A0KG_44L0/54AB7A0KG_44L0/191206/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02205 and software number 1037387530. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S021981037389009Audi A8
0261S021991037386829Audi A6
0261S022021037381166Audi Q7 4.2 FSI, Audi Q7 V8 4.2FSI
0261S022021037382103Audi Q7
0261S022051037387536Audi RS4, Audi RS4 RS4 4.2 V8
0261S022061037387947Audi RS4 RS4 4.2 V8
0261S022061037394888Audi RS4
0261S022101037380014Audi A4

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page