Original file

Volkswagen Touareg Bosch MED9.1.x 0261S02586 / 1037390480

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Volkswagen Touareg, hardware number 0261S02586 and software number 1037390480, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Touareg3.6 petrol 280PS
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02586
Software number
1037390480
Vehicle maker's hardware number
03H906032S
Software / calibration
03H906032CR

Technical data

Vehicle
BrandVolkswagen
Car modelTouareg
Engine3.6 petrol 280PS
Power280.0PS / 205.9kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02586
Software number1037390480
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key9991a89812755629
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02586 / 1037390480Offset in the file: 0x1CF303 / 0x1CF30E
Vehicle maker's hardware number03H906032SOffset in the file: 0x1D86BE
Software / calibration03H906032CR · version 1671Offset in the file: 0x1CF2DC
Engine descriptionT-GP 7GHOffset in the file: 0x1CF2E9
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D913B_N45B2T0/D913B_N45B2T0/140807/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02586 and software number 1037390480. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S025741037398562Audi RS6
0261S025771037395162Audi TT
0261S025781037393911Audi S8, Audi S8 5.2 V10 Quattro, Audi S6 5.2 FSI V10
0261S025831037397287Audi TT S
0261S025871037390484Volkswagen Touareg
0261S025921037396296Audi Q7
0261S026121037387709Audi S6
0261S026121037387930Audi S6

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page