Original file

Škoda Superb 2 3.6 FSI V6 Bosch MED9.1.x 0261S02696 / 1037400653

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Škoda Superb 2 3.6 FSI V6, hardware number 0261S02696 and software number 1037400653, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb 2 3.6 FSI V63.6 petrol 260.0PS / 191.2KW
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0261S02696
Software number
1037400653
Vehicle maker's hardware number
03H906032AB
Software / calibration
03H906032EM

Technical data

Vehicle
BrandŠkoda
Car modelSuperb 2 3.6 FSI V6
Engine3.6 petrol 260.0PS / 191.2KW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02696
Software number1037400653
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyce612c2b845b07aa
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02696 / 1037400653Offset in the file: 0x1CFE28 / 0x1CFE33
Vehicle maker's hardware number03H906032ABOffset in the file: 0x1D9856
Software / calibration03H906032EM · version 4142Offset in the file: 0x1CFE01
Engine descriptionEOS-3.6-DQ-EU5Offset in the file: 0x1CFE0E
Bosch project identifier (EPK)56/1/MED91/3/6W6432.D//D913E_45P0P0/D913E_45P0P0/301008/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02696 and software number 1037400653. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S026691037502801Audi S5
0261S026691037539446Audi S5
0261S026711037504405Audi R8
0261S026721037500805Audi R8
0261S026991037384214Audi S3
0261S026991037501375Seat Leon, Seat Leon Cupra
0261S027001037503615Audi TT RS, Audi TT RS 2.5 TFSI V5
0261S027071037504340Audi S5 4.2 FSI V8

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page