Original file

Audi RS3 Bosch MED9.1.x 0261S02825 / 8J0907404M

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi RS3, hardware number 0261S02825 and software number 8J0907404M, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS3339PS
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0261S02825
Software number
8J0907404M
Bosch part / software
10SW007123
Software / calibration
8P0907404

Technical data

Vehicle
BrandAudi
Car modelRS3
Engine339PS
Power339.9PS / 250.0kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02825
Software number8J0907404M
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key09ffc910f0dd5970
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02825 / 10SW007123Offset in the file: 0x1D8032 / 0x1D803D
Vehicle maker's hardware number8J0907404MOffset in the file: 0x1E36B7
Software / calibration8P0907404 · version 0060Offset in the file: 0x1D800B
Engine description2.5l R5/4V TFSIOffset in the file: 0x1D8018
Bosch project identifier (EPK)67/1/MED91/5/5425.01//58ATTA2JG_49F0_085/58ATTA2JG_49F0_085/181115/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02825 and software number 8J0907404M. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S028121037511610Audi S5, Audi S5 2010
0261S028131037511609Audi A5, Audi S5 4.2 FSI V8, Audi S5
0261S028211037517963Volkswagen Passat 3.6 FSI R36
0261S028251037526659Audi RS3
0261S028271037396366Audi RS4
0261S028321037535969Audi R8
0261S028461037516929Audi S5
0261S028991037535812Audi R8 5.2 FSI V10 Quattro

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page