Original file

Lamborghini Gallardo Bosch MED9.1.2 0261S02852 / 1037524002

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Lamborghini Gallardo, hardware number 0261S02852 and software number 1037524002, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Lamborghini Gallardopetrol 550PS
Control unit
Bosch MED9.1.2
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0261S02852
Software number
1037524002
Software / calibration
400907552P

Technical data

Vehicle
BrandLamborghini
Car modelGallardo
Enginepetrol 550PS
Power550.0PS / 404.5kW
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number0261S02852
Software number1037524002
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key7e12f123da39deb6
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02852 / 1037524002Offset in the file: 0x1D4165 / 0x1D4170
Software / calibration400907552P · version 0010Offset in the file: 0x1D413E
Engine description5.2L V10HDZ/4V FSIOffset in the file: 0x1D414B
Bosch project identifier (EPK)68/1/MED91/5/10450.01//56FLMA2JG_50D4_0B0/56FLMA2JG_50D4_0B0/120112/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02852 and software number 1037524002. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.2

HardwareSoftwareVehicles
0261S028351037526648Audi TT RS, Audi TT RS+, Audi TT RS+ 2.5 TFSI V5
0261S0283510SW007866Audi TT, Audi TT RS plus
0261S028391037514566Audi R8
0261S028391037535812Audi R8
0261S028591037535812Audi R8
0261S028621037522368Audi R8
0261S028641037521286
0261S028671037521124

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page