Original file

Ford C-Max Bosch MED17.0 BV61-14C204-CDC / 1037535935

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Ford C-Max, hardware number BV61-14C204-CDC and software number 1037535935, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford C-Max1.6 petrol 150PS
Control unit
Bosch MED17.0
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
BV61-14C204-CDC
Software number
1037535935
Vehicle maker's hardware number
BV61-12A650-CDC

Technical data

Vehicle
BrandFord
Car modelC-Max
Engine1.6 petrol 150PS
Power150PS / 110.3kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBV61-14C204-CDC
Software number1037535935
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameFord Max 1.6 2012 150PS
File key9f539c7bb70b5811
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software1037535935Offset in the file: 0x04001A
Vehicle maker's hardware numberBV61-12A650-CDCOffset in the file: 0x0647AE
Software / calibrationBV61-14C204-CDCOffset in the file: 0x06479B
Bosch project identifier (EPK)56/1/MED17/2/SIG16GGA//D170_06D_106A_0D03/150611/094015/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BV61-14C204-CDC and software number 1037535935. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
BV61-14C204-AUA1037522020Ford Focus T ECOBOOST 2012, Ford Focus
BV61-14C204-BKB1037518322Ford Focus
BV61-14C204-BLC1037536436Ford Focus
BV61-14C204-CDB1037522387Ford Focus, Ford Focus cmax 1.6ecoboost turbo
BV61-14C204-CEB1037522388Ford C-MAX
BV61-14C204-CTA1037523893Ford C-Max
BV61-14C204-CUA1037523832Ford C-Max 1.6T, Ford c max T 2012, Ford Focus
BV61-14C204-CUB1037535905Ford T 18 09 2013

Bosch MED17.0 original files

The Bosch MED17.0 unit page