Original file

Ford C-Max Bosch MED17.0 BV61-14C204-EKA / 10SW025659

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Ford C-Max, hardware number BV61-14C204-EKA and software number 10SW025659, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford C-Max1.6 petrol 150PS
Control unit
Bosch MED17.0
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
BV61-14C204-EKA
Software number
10SW025659
Vehicle maker's hardware number
BV61-12A650-EKA

Technical data

Vehicle
BrandFord
Car modelC-Max
Engine1.6 petrol 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBV61-14C204-EKA
Software number10SW025659
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key216428827e9b7b29
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software10SW025659Offset in the file: 0x04001A
Vehicle maker's hardware numberBV61-12A650-EKAOffset in the file: 0x064EEE
Software / calibrationBV61-14C204-EKAOffset in the file: 0x064EDB
Bosch project identifier (EPK)56/1/MED17/2/SIG16GGA//D170_06D_106A_0D07/080517/164753/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BV61-14C204-EKA and software number 10SW025659. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

Bosch MED17.0 original files

The Bosch MED17.0 unit page