Original file

Ford Focus Bosch MED17.0.1 CV61-14C204-ANK / 10SW011393

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Focus, hardware number CV61-14C204-ANK and software number 10SW011393, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus1.0 petrol 126PS
Control unit
Bosch MED17.0.1
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CV61-14C204-ANK
Software number
10SW011393
Vehicle maker's hardware number
CV61-12A650-ANK

Technical data

Vehicle
BrandFord
Car modelFocus
Engine1.0 petrol 126PS
Power126.4PS / 93.0kW
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberCV61-14C204-ANK
Software number10SW011393
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key62e3ae6fd69d9f50
Identification read from the file
ECU nameMED17.0.1
Read typeCalibration only (data set)
Bosch part / software10SW011393Offset in the file: 0x04001A
Vehicle maker's hardware numberCV61-12A650-ANKOffset in the file: 0x068DEA
Software / calibrationCV61-14C204-ANKOffset in the file: 0x068DC6
Bosch project identifier (EPK)56/1/MED17/2/FOXGTDI//D1701_000_142H_0J10/281013/161241/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CV61-14C204-ANK and software number 10SW011393. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0.1

HardwareSoftwareVehicles
CV61-14C204-ANF1037532029Ford Focus, Ford Fiesta
CV61-14C204-ANG1037537529Ford Focus, Ford EcoSport
CV61-14C204-ANH1037541504Ford Focus, Ford Fiesta
CV61-14C204-ANJ1037548392Ford Focus
CV61-14C204-APE1037537533Ford Focus
CV61-14C204-APG1037548398Ford Focus
CV61-14C204-APH10SW011397Ford Focus
CV61-14C204-APHCV61-12A650-APHFord Focus 1.0 EcoBoost

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page