Original file

BMW 5 Serie - Sedan 535i Bosch MEVD17.2.x 000007D0031D01 / 98GVIDX5

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 5 Serie - Sedan 535i, hardware number 000007D0031D01 and software number 98GVIDX5, 12,288.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5 Serie - Sedan 535ipetrol 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
12,288.00 KB · Flash
Hardware number
000007D0031D01
Software number
98GVIDX5
Bosch part / software
10SW004439
Software / calibration
75B98G6B / 98GVIDX5

Technical data

Vehicle
BrandBMW
Car model5 Serie - Sedan 535i
Enginepetrol 306.0PS / 225.1kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number000007D0031D01
Software number98GVIDX5
File
File typeOriginal flash read
File size12,288.00 KB (12,582,912 bytes)
File key4861c6498ba4dcfd
Identification read from the file
ECU nameMEVD17.2.X
Read typeFull read (boot area included)
Bosch part / software10SW004439Offset in the file: 0x18001A
Software / calibration75B98G6B / 98GVIDX5Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2-N55-M0-B30-F010-EU5-MSA2-AG-L_L-RL-Allrad-PVL
Internal build stringMEVD17.2-CB_L6C-D.6.2.0_G.5.7.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75B98G6B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 000007D0031D01 and software number 98GVIDX5. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
-1037524498BMW X3 3.0I
0000076291301037518222BMW X5 X5-35i
000007D0031D011037503729BMW 5er GT 535i
000007D0031D011037518209BMW 5 Serie - Touring 535i
00000E2B31F0011037542954BMW 1er 118i
00000E2B3B0A019ZX99T0BBMW 1 Serie - 5drs 316i
00000F795950031037533850BMW 5er 535i
00000FEE034F011037533981BMW 5er GT 535i

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page