Original file

BMW 3er Bosch MEVD17.2.x 00879S09EI0BHTD1S / 1037556743

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 3er, hardware number 00879S09EI0BHTD1S and software number 1037556743, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er3.0 petrol 306PS
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
00879S09EI0BHTD1S
Software number
1037556743
DME hardware number
8661469

Technical data

Vehicle
BrandBMW
Car model3er
Engine3.0 petrol 306PS
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number00879S09EI0BHTD1S
Software number1037556743
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key1e1341ebc5f4ccc7
Identification read from the file
ECU nameMEVD17.2.6
Read typeFull read (boot area included)
Bosch part / software1037556743Offset in the file: 0x02001A
DME hardware number8661469Offset in the file: 0x00D8AA
Software / calibration00879S09EI0BHTD1SOffset in the file: 0x180079
Internal build string011_G.8.8.0_MEVD1726P_NROffset in the file: 0x00D558
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_79S9EI0B//79S9EI0B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00879S09EI0BHTD1S and software number 1037556743. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page