Original file
Jeep Wrangler Motorola NGC4 CAN ETC10P06V00.9_ENGV00.8_T42
An original (stock) flash read of the Motorola NGC4 CAN control unit, fitted in Jeep Wrangler, software number ETC10P06V00.9_ENGV00.8_T42, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Jeep Wrangler3.8 · 204.0PS / 150.0kW
- Control unit
- Motorola NGC4 CAN
- File size
- 2,048.00 KB
- Contents
- Flash
- Software number
- ETC10P06V00.9_ENGV00.8_T42
Technical data
| Brand | Jeep |
|---|---|
| Car model | Wrangler |
| Engine | 3.8 |
| Fuel | Petrol |
| Power | 204.0PS / 150.0kW |
| Control unit | Motorola NGC4 CAN |
|---|---|
| ECU maker | Motorola |
| Software number | ETC10P06V00.9_ENGV00.8_T42 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 02cddeca38dd17ee |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Motorola NGC4 CAN whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number ETC10P06V00.9_ENGV00.8_T42. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.