Original file

Fiat bravo 12V Bosch MA1.7.3 0261204405 / 355864

An original (stock) flash read of the Bosch MA1.7.3 control unit, fitted in Fiat bravo 12V, hardware number 0261204405 and software number 355864, 64.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat bravo 12V1.4
Control unit
Bosch MA1.7.3
File size
64.00 KB
Contents
Flash
Hardware number
0261204405
Software number
355864

Technical data

Vehicle
BrandFiat
Car modelbravo 12V
Engine1.4
Control unit
Control unitBosch MA1.7.3
ECU makerBosch
Hardware number0261204405
Software number355864
File
File typeOriginal flash read
File size64.00 KB (65,536 bytes)
From the file nameFiat bravo 1.4 12V
File key0b8db969b51130bd

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MA1.7.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261204405 and software number 355864. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MA1.7.3

Bosch MA1.7.3 original files