Original file

Mercedes-Benz CLS E53 MG1CP002 Bosch MG1CP002 0265490200 / 10SW044283

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz CLS E53 MG1CP002, hardware number 0265490200 and software number 10SW044283, 7,936.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLS E53 MG1CP002
Control unit
Bosch MG1CP002
File size
7,936.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW044283
Bosch part / software
10SW002429
Software / calibration
2569021700

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS E53 MG1CP002
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Hardware number0265490200
Software number10SW044283
File
File typeOriginal flash read
File size7,936.00 KB (8,126,464 bytes)
From the file nameMercedes CLS E53 MG1CP002
File key33f5641ec2784cf1
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW002429Offset in the file: 0x000164
Software / calibration2569021700Offset in the file: 0x3B9CC7
Data set number2569036100Offset in the file: 0x680C5C
Boot software2569040100Offset in the file: 0x0186D5
Bosch project identifier (EPK)66/1/MG1CP002/1/DA_MDG1G//MRG1x_18A_FRG_042_00_Star23_xx_M256xx///Offset in the file: 0x3B9CD8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW044283. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
026549020010SW027113Mercedes-Benz AMG GT 4-Door, Mercedes-Benz AMG GT 4-door Coupe, Mercedes-Benz CLS53 AMG
026549020010SW029157Mercedes-Benz A45, Mercedes-Benz A45 S, Mercedes-Benz A45S
026549020010SW034398Mercedes-Benz E
026549020010SW037594Mercedes-Benz E53 AMG
026549020010SW044805Mercedes-Benz Benz C257 CLS53 AMG
026549020010SW047715Mercedes-Benz E / E Coupe, Mercedes-Benz AMG GT 4-door Coupé, Mercedes-Benz GT
026549020010SW048174Mercedes-Benz AMG GT
026549020010SW051357Mercedes-Benz GT 43, Mercedes-Benz GLE

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page