Original file

Opel Calibra M2.5 0335532356 / 81026RT3800

An original (stock) flash read of the M2.5 control unit, fitted in Opel Calibra, hardware number 0335532356 and software number 81026RT3800, 32.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Calibra2.0 petrol 150PS
Control unit
M2.5
File size
32.00 KB
Contents
Flash
Hardware number
0335532356
Software number
81026RT3800

Technical data

Vehicle
BrandOpel
Car modelCalibra
Engine2.0 petrol 150PS
Power150.0PS / 110.3kW
Control unit
Control unitM2.5
Hardware number0335532356
Software number81026RT3800
File
File typeOriginal flash read
File size32.00 KB (32,768 bytes)
File key6d46f518fef2b00d

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a M2.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0335532356 and software number 81026RT3800. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of M2.5

M2.5 original files