Original file

Audi Bosch MG1CS002 06M907309H / 10SW073464

An original (stock) flash read of the Bosch MG1CS002 control unit, fitted in Audi, hardware number 06M907309H and software number 10SW073464, 7,952.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandAudi
Engine2.9 petrol 450PS
Fuelpetrol
Displacement2.9
Power450.0PS / 331.0kW
Control unit
Control unitBosch MG1CS002
ECU makerBosch
Hardware number06M907309H
Software number10SW073464
File
File typeOriginal flash read
File size7,952.00 KB (8,142,848 bytes)
File keyd8921afe568620c7
Price€20

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 06M907309H and software number 10SW073464. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Bosch MG1CS002

Bosch MG1CS002 original files

The Bosch MG1CS002 unit page