Original file

Mercedes-Benz Bosch MED17.7 A2649039500 / 10SW042595

An original (stock) flash read of the Bosch MED17.7 control unit, fitted in Mercedes-Benz, hardware number A2649039500 and software number 10SW042595, 760.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz
Control unit
Bosch MED17.7
Read type
Calibration only (data set)
File
760.00 KB · Flash
Hardware number
A2649039500
Software number
10SW042595

Technical data

Vehicle
BrandMercedes-Benz
Control unit
Control unitBosch MED17.7
ECU makerBosch
Hardware numberA2649039500
Software number10SW042595
File
File typeOriginal flash read
File size760.00 KB (778,240 bytes)
From the file nameL533CC0
File keyb2c8f4bb2f343650
Identification read from the file
ECU nameMED17.7
Read typeCalibration only (data set)
Bosch part / software10SW042595Offset in the file: 0x00001A
Data set number2649039500Offset in the file: 0x07B5C1
Bosch project identifier (EPK)36/1/MED17/3///D177_4A2_18A043S03///Offset in the file: 0x0BDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number A2649039500 and software number 10SW042595. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7

Bosch MED17.7 original files