Original file
Land Rover Range Rover Evoque Bosch MED17.0 BJ32-14C204-MBR / 1037517034
An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Land Rover Range Rover Evoque, hardware number BJ32-14C204-MBR and software number 1037517034, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover Range Rover Evoque2.2 240PS
- Control unit
- Bosch MED17.0
- Read type
- Full read (boot area included)
- File
- 2,048.00 KB · Flash
- Hardware number
- BJ32-14C204-MBR
- Software number
- 1037517034
- Bosch part / software
- 1037529130
- Vehicle maker's hardware number
- BJ32-12A650-MBR
- Software / calibration
- BJ32-12B684-MA
Technical data
| Brand | Land Rover |
|---|---|
| Car model | Range Rover Evoque |
| Engine | 2.2 240PS |
| Power | 240.0PS / 176.5kW |
| Control unit | Bosch MED17.0 |
|---|---|
| ECU maker | Bosch |
| Hardware number | BJ32-14C204-MBR |
| Software number | 1037517034 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| From the file name | Land Rover Range Rover Evoque |
| File key | e8128290e0451237 |
| ECU name | MED17.0 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1767 | |
| Bosch part / software | 1037529130 | Offset in the file: 0x08001A |
| Vehicle maker's hardware number | BJ32-12A650-MBR | Offset in the file: 0x061852 |
| Software / calibration | BJ32-12B684-MA | Offset in the file: 0x00FC00 |
| Engine description | BJ32-14C204-MBR | Offset in the file: 0x06182E |
| Internal build string | MED170_PBL_67_200_0700 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 54/1/MED17/2/I420GMO//D170_200_111_0864/010812/112335/ | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number BJ32-14C204-MBR and software number 1037517034. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.0
| Hardware | Software | Vehicles |
|---|---|---|
| BJ32-12A650-MDA | 10SW011951 | Land Rover Evoque 2011y 2.0L |
| BJ32-14C204-MAY | 1037517034 | Land Rover Range Rover Evoque |
| BJ32-14C204-MBN | 1037517034 | Land Rover Range Rover Evoque |
| BJ32-14C204-MBN | 1037521249 | Land Rover Evoque |
| BJ32-14C204-MBR | 1037529130 | Land Rover Range Rover Evoque |
| BJ32-14C204-MBT | 1037517034 | Land Rover Evoque |
| BJ32-14C204-MBT | 1037539575 | Land Rover Range Rover Evoque, Land Rover 2.0L MED 17.0 |
| BJ32-14C204-MBU | 1037547043 | Land Rover Range Rover Evoque |