Original file

Audi A3 - A3 Berline Temic DQ250 02E927770AM / 02E300053N

An original (stock) flash read of the Temic DQ250 control unit, fitted in Audi A3 - A3 Berline, hardware number 02E927770AM and software number 02E300053N, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandAudi
Car modelA3 - A3 Berline
Engine2.0 petrol 280PS
Fuelpetrol
Displacement2.0
Power280.0PS / 205.9kW
Control unit
Control unitTemic DQ250
ECU makerTemic
Hardware number02E927770AM
Software number02E300053N
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key7aabe1c9609a98f4
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Temic DQ250 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 02E927770AM and software number 02E300053N. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Temic DQ250

Temic DQ250 original files

The Temic DQ250 unit page