Original file

Volkswagen Transporter 1.9D 2004 Turbo Bosch EDC15P 0281010257 / 1037360550

An original (stock) flash read of the Bosch EDC15P control unit, fitted in Volkswagen Transporter 1.9D 2004 Turbo, hardware number 0281010257 and software number 1037360550, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter 1.9D 2004 Turbo1.9 · 88.0PS / 64.7kW
Control unit
Bosch EDC15P
Read type
Full read (boot area included)
File
512.00 KB · Flash
Hardware number
0281010257
Software number
1037360550
Vehicle maker's hardware number
038906012CE

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter 1.9D 2004 Turbo
Engine1.9
FuelDiesel
Power88.0PS / 64.7kW
Control unit
Control unitBosch EDC15P
ECU makerBosch
Hardware number0281010257
Software number1037360550
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameVW Transporter 2004 Turbo Diesel
File keyefa318aa2f8f33a5
Identification read from the file
ECU nameEDC15VM+
Read typeFull read (boot area included)
Bosch part / software0281010257 / 1037360550Offset in the file: 0x053585 / 0x010046
Vehicle maker's hardware number038906012CEOffset in the file: 0x05355A
Software / calibrationversion 3328
Engine description1,9l R4 EDCOffset in the file: 0x053566

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC15P whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281010257 and software number 1037360550. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC15P

HardwareSoftwareVehicles
02810102261037354265Audi A4, Audi A4 1.9TDI AJM
02810102261037354608Audi A4
02810102271037360790Audi A2 2000 Turbodiesel 44.9KWKW
02810102271037362780Audi A2
02810102581037352562Volkswagen Lupo 1.2 TDI, Volkswagen Lupo 2001 Turbodiesel 44.9KWKW
02810102581037352679Volkswagen lupo 1.2TDI
02810102581037352999Volkswagen lupo 1.2TDI, Volkswagen Lupo 1.2 TDI
02810102591037354621Volkswagen Lupo, Volkswagen Lupo 1.4 TDI

Bosch EDC15P original files

The Bosch EDC15P unit page