Original file

Fiat Bravo Turbodiesel 77.2KWKW Bosch EDC15P+ 0281010928 / 1037350159

An original (stock) flash read of the Bosch EDC15P+ control unit, fitted in Fiat Bravo Turbodiesel 77.2KWKW, hardware number 0281010928 and software number 1037350159, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Bravo Turbodiesel 77.2KWKW1.9 diesel · 105.0PS / 77.2kW
Control unit
Bosch EDC15P+
Read type
Calibration only (data set)
File
512.00 KB · Flash
Hardware number
0281010928
Software number
1037350159

Technical data

Vehicle
BrandFiat
Car modelBravo Turbodiesel 77.2KWKW
Engine1.9 diesel
Power105.0PS / 77.2kW
Control unit
Control unitBosch EDC15P+
ECU makerBosch
Hardware number0281010928
Software number1037350159
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameFiat Bravo 1.9 JTD Turbodiesel
File keydf133e2e349f9e6a
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037350159Offset in the file: 0x050032

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC15P+ whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281010928 and software number 1037350159. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC15P+

HardwareSoftwareVehicles
02810108911037363556Seat Ibiza, Seat ibiza 1.9TDI ASZ
02810108921037362795Audi A3 ATD, Audi A3 1.9 TDI
02810108921037363548Audi A3
02810109051037363745Škoda superb 2.5TDI
02810109281037351906Škoda octavia 1.9TDI
02810109281037363744Škoda superb 1.9TDI
02810109401037363212Volkswagen passat 1.9TDI, Volkswagen Passat 1.9 TDI pd
02810109401037366946Volkswagen passat 1.9TDI AWX

Bosch EDC15P+ original files

The Bosch EDC15P+ unit page