Original file

Mercedes-Benz E-Class Bosch EDC16C2 CR30-647-D1M9-211WA-130KW-ME-3702X005 / 1037366547

An original (stock) flash read of the Bosch EDC16C2 control unit, fitted in Mercedes-Benz E-Class, hardware number CR30-647-D1M9-211WA-130KW-ME-3702X005 and software number 1037366547, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E-Class2.7 diesel 177PS
Control unit
Bosch EDC16C2
Read type
OBD read (no boot area)
File
1,024.00 KB · Flash
Hardware number
CR30-647-D1M9-211WA-130KW-ME-3702X005
Software number
1037366547

Technical data

Vehicle
BrandMercedes-Benz
Car modelE-Class
Engine2.7 diesel 177PS
Power177PS / 130.2kW
Control unit
Control unitBosch EDC16C2
ECU makerBosch
Hardware numberCR30-647-D1M9-211WA-130KW-ME-3702X005
Software number1037366547
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
File key17a359dd3f49a256
Identification read from the file
Read typeOBD read (no boot area)
Bosch part / software1037366547Offset in the file: 0x040010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR30-647-D1M9-211WA-130KW-ME-3702X005 and software number 1037366547. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C2

Bosch EDC16C2 original files

The Bosch EDC16C2 unit page