Original file

Mercedes-Benz E-Class Bosch EDC16C2 CR4-642-42P7-211WSA-165KW-PT2R05-LR-1807X063BME / 1037390804

An original (stock) flash read of the Bosch EDC16C2 control unit, fitted in Mercedes-Benz E-Class, hardware number CR4-642-42P7-211WSA-165KW-PT2R05-LR-1807X063BME and software number 1037390804, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E-Class3.2 diesel 203PS
Control unit
Bosch EDC16C2
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR4-642-42P7-211WSA-165KW-PT2R05-LR-1807X063BME
Software number
1037390804

Technical data

Vehicle
BrandMercedes-Benz
Car modelE-Class
Engine3.2 diesel 203PS
Power203.2PS / 149.5kW
Control unit
Control unitBosch EDC16C2
ECU makerBosch
Hardware numberCR4-642-42P7-211WSA-165KW-PT2R05-LR-1807X063BME
Software number1037390804
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key65afb5278e8877b0
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037390804Offset in the file: 0x190010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906F7

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4-642-42P7-211WSA-165KW-PT2R05-LR-1807X063BME and software number 1037390804. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C2

Bosch EDC16C2 original files

The Bosch EDC16C2 unit page