Original file

Renault Megane II Bosch EDC16C3 8200370825 / 1037368734

An original (stock) flash read of the Bosch EDC16C3 control unit, fitted in Renault Megane II, hardware number 8200370825 and software number 1037368734, 1,480.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Megane II1.9 diesel 120PS
Control unit
Bosch EDC16C3
Read type
Full read (boot area included)
File
1,480.00 KB · Flash
Hardware number
8200370825
Software number
1037368734

Technical data

Vehicle
BrandRenault
Car modelMegane II
Engine1.9 diesel 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC16C3
ECU makerBosch
Hardware number8200370825
Software number1037368734
File
File typeOriginal flash read
File size1,480.00 KB (1,515,520 bytes)
From the file nameRenault Megane 1.9 DCI 2004
File key27aca00a883d9d54
Identification read from the file
ECU nameEDC16C3
Read typeFull read (boot area included)
ProcessorMPC555
Bosch part / software1037368734Offset in the file: 0x021010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8200370825 and software number 1037368734. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C3

HardwareSoftwareVehicles
82003558161037367956Renault Megane
82003708201037369198Renault Megane II
82003708231037368734Renault Megane
82003708231037368735Renault Megane, Renault Megane II
82003708251037368858Renault Megane
82003708281037368860Renault Megane II
82003708281037369896Renault Megane 2
82003708331037368734Renault

Bosch EDC16C3 original files

The Bosch EDC16C3 unit page