Original file

Renault Mascotte 2007 Turbodiesel 88.3KWKW Bosch EDC16C3 8200391957 / 8200525721

An original (stock) flash read of the Bosch EDC16C3 control unit, fitted in Renault Mascotte 2007 Turbodiesel 88.3KWKW, hardware number 8200391957 and software number 8200525721, 128.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Mascotte 2007 Turbodiesel 88.3KWKW3.0 diesel · 120.1PS / 88.3kW
Control unit
Bosch EDC16C3
Read type
Calibration only (data set)
File
128.00 KB · Flash
Hardware number
8200391957
Software number
8200525721
Bosch part / software
1037375861

Technical data

Vehicle
BrandRenault
Car modelMascotte 2007 Turbodiesel 88.3KWKW
Engine3.0 diesel
Power120.1PS / 88.3kW
Control unit
Control unitBosch EDC16C3
ECU makerBosch
Hardware number8200391957
Software number8200525721
File
File typeOriginal flash read
File size128.00 KB (131,072 bytes)
From the file nameRenault Mascotte 3.0 CDI 2007
File keyd7135f79779679a9
Identification read from the file
ECU nameEDC16C3
Read typeCalibration only (data set)
Bosch part / software1037375861Offset in the file: 0x000010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8200391957 and software number 8200525721. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C3

HardwareSoftwareVehicles
82003708361037368859Renault Scenic
82003919571037372308Opel Movano
82003919571037372311Renault Master II
82003919571037376112Renault MASCOTT
82003919661037377156Renault Scenic
82004077791037371367Renault Megane II
82004078401037369239Renault Megane II
82004078401037369894Renault Megane 2

Bosch EDC16C3 original files

The Bosch EDC16C3 unit page